Compact Design
Efficient clinical footprint for procedure rooms and outpatient settings.
Embedded HardwareCADI KL-105Built by Cynosylix Technology
Skin Cautery System
For CADLR Meditech · CADI KL-105
A compact electrosurgical system for controlled desiccation, fulguration, and coagulation in clinical settings.
HardwareOverview
CADI KL-105 is a compact electrosurgical skin cautery system that delivers high-frequency electrical energy through the selected electrode. Cynosylix Technology developed the embedded hardware firmware and control logic for CADLR Meditech — enabling touch-interface operation across High, Low, and Bipolar modes for dependable clinical workflow.
Full product information, brochures, and support are available on cadlrmeditech.com/cadi-kl-105. Hardware firmware developed by Cynosylix Technology.
Product Highlights
Touch Interface
Clear operating controls for mode and output selection during procedures.
Flexible Selection
High, Low, and Bipolar modes support different clinical applications.
Clinical Focus
Engineered for dependable workflow in professional healthcare environments.
Three Operating Modes
01
High Mode
A higher-output monopolar mode for applications requiring stronger desiccation or fulguration. Output should be selected according to the procedure and tissue response.
02
Low Mode
A lower-output monopolar mode intended for delicate or superficial applications where finer control of the treatment effect is preferred.
03
Bipolar Mode
Current passes between the two tips of bipolar forceps, concentrating the treatment effect in the tissue held between them and helping limit current spread.
Technical Specifications
Maximum output settings and rated operating values by mode.
| Mode | Max Power | Max Voltage | Rated Load | Repetition Frequency |
|---|---|---|---|---|
| HI | 35 W | 8000 Vpp | 1000 Ω | 24.4 KHz |
| LO | 20 W | 3000 Vpp | 500 Ω | 32.3 KHz |
| BI | 35 W | 3000 Vpp | 500 Ω | 32.3 KHz |
Cynosylix Development Scope
- ✓Embedded firmware and hardware control logic for mode switching and output management.
- ✓Touch-interface control system integration for High, Low, and Bipolar operating modes.
- ✓Signal timing, safety interlocks, and electrosurgical output regulation aligned with product specifications.
- ✓Collaboration with CADLR Meditech on clinical workflow and device behaviour requirements.
Intended Use & Compliance
- High and Low modes deliver monopolar energy through the active electrode; Bipolar mode concentrates current between the two tips of bipolar forceps.
- Mode and output selection must be based on the intended procedure and professional clinical judgement.
- This device should be operated only by trained healthcare professionals in accordance with approved instructions for use, institutional protocols, and applicable safety requirements.
- Technical specification values are supplied by CADLR Meditech.
Product Information & Support
For specifications, availability, product brochures, and user manuals, contact CADLR Meditech directly. For embedded hardware development enquiries, reach out to Cynosylix Technology.